To remove soot and smoke from walls, furniture and floors, mix together:
4 to 6 tbsp. Tri-Sodium Phosphate
1 cup Lysol or any chloride bleach
1 gallon warm water
Wear rubber gloves when cleaning. After washing the article, rinse with clear warm water and dry thoroughly.
Walls may be washed down while wet. Use a mild soap or detergent. Wash a small area at one time, working from the floor up. Then rinse the wall with clear water immediately. Ceilings should be washed last. Do not repaint until the walls and ceilings are completely dry.
Wallpaper also can be repaired. Use a commercial paste to repaste loose edges or sections. Contact your wallpaper dealer or installer for information on wallpaper cleaners. Washable wallpaper can be washed like an ordinary wall, but care must be taken not to soak the paper. Work from bottom to top to prevent streaking.
Do not dry your furniture in the sun. The wood will warp and twist out of shape. Clear off the mud and dirt by scrubbing with a stiff brush and a cleaning solution. You can also rub the wood surface with a 4/0 steel wool pad dipped in liquid polishing wax, wipe with a soft cloth and then buff. Remove the drawers and let them dry thoroughly so there will be no sticking when you replace them. Wet wood can decay and mold, so allow it to dry thoroughly. Open doors and windows for good ventilation. Turn on your furnace or air conditioner, if necessary. If mold forms, wipe the wood with a cloth soaked in a mixture of borax dissolved in hot water. To remove white spots or film, rub the wood surface with a cloth soaked in a solution of a half cup of household ammonia and a half cup of water. Wipe dry and polish with wax, or rub the surface with a cloth soaked in a solution of a half cup turpentine and a half cup of linseed oil. Be careful because turpentine is combustible.